The FBTVERTUS CLA406A two-way bi-amplified speaker system incorporates 4 x 6,5” custom woofer with 1,5” voice coil and 1 x 1,4″ B&C HF neodymium driver with 2,5 voice coil. The internal Class D amplifier module constructed in die-cast aluminum delivers 600W for LF, 300W for HF and DSP processor with 8 equalization presets provide unexpected dynamics in a system of these dimensions. The FBT VERTUS CLA 406A shall meet the following performance criteria: frequency response from 65Hz to 20kHz, maximum SPL of 133dB. The FBT VERTUS CLA 406A feature a 0,47″ birch plywood with internal metal bracing and the front shall be protected by a heavy duty metal grille. The control panel provides Level control, HF level, Preset, HPfilter, Gnd lift, 3 status led ( on, peak, prt/limit ), XLR input & link and Neutrik Powercon Cable Duplex for power supply. Via optional hardware it is possible to couple two systems with angles of 0°, 10°, 20° and additional accessories are available for system suspension. It can be integrated elegantly and with minimal intrusion into any environment; it is ideal for live applications, assisted by sub CLA118SA, which for fixed installations.

FEATURES:

2-way bi-amplified line array column system
4 x 165mm (6.5”) custom woofer voice coil 38mm (1.5”)
B&C HF neodymium driver with 36mm (1.4”) exit and 64mm (2.5”) voice coil
Waveguide FBT large format with dispersion 100 ° H x 25 ° V
Frequency response from 65Hz to 20KHz
Amplifiers Class D 600Wrms for LF and HF 300Wrms with switching power supply
Processor DSP with 8 EQ presets
Control Panel with XLR input and link, volume, presets, filter-HP, ground-lift
Neutrik powerCON power IN and LINK connectors
12mm (1/2”) birch plywood with scratch-resistant coating
12 attachment points above and below for the optional hardware that allows the installation of hanging or pair two CLA406A with angle of 0 ° – 10 ° – 20 ° in the vertical plane
Top side tilted 10 ° for the inclination of two columns without damaging gap between the waveguides for a wavefront extremely consistent over the 18kHz
35mm (1.3/8”) top hat for stand mount facility
It is ideal for live applications, assisted by sub CLA 118SA, which for fixed installations

SPECIFICATIONS:

Built-in amplifier LF/HF: 600/300 W RMS
Built-in amplifier peak LF/HF: 1200/600 W
Frequency response: 65Hz – 20KHz -6dB
Low frequency woofer: 4×6.5 – 1.5 coil inch
High frequency driver: 1×1.4 – 2.5 coil – neodymium inch
Maximum SPL cont/peak: 133 dB
Dispersion: 100°x25° H x V
Input impedance: 22 Kohm
Crossover frequency: 1.2 KHz
Ac power requirements: 640 VA
Input connector: XLR with loop
Power cord: 5 mm
Net Dimension (WxHxD): 190x1235x290 mm
Net weight: 27 kg
Transport Dimension (WxHxD): 290x1235x390 mm
Transport weight: 32 kg

Price-Flex

Price Flex

Found a better price elsewhere?

Send us the details and we’ll see if we can match or beat the offer while still providing the service, support and warranty that Bounce Online customers expect.

✔ Trusted South African retailer since 2015
✔ Local warranty and support
✔ Fast nationwide delivery
✔ Competitive pricing on leading brands

Simply complete the form below and we’ll get back to you as soon as possible.

Delivery Exclusions

PLEASE NOTE:

Some products are exceptionally large, heavy or bulky and require specialist freight services. This typically includes items such as large PA speakers, dual 15″ speaker cabinets, dual 18″ subwoofers, flight cases and other oversized or very heavy equipment.

We work hard to keep our prices as competitive as possible and, in most cases, delivery is completely covered by our standard shipping rates. However, for certain oversized items being delivered to regional or outlying areas, the actual courier cost can be significantly higher than standard deliveries. This is also owing to factors completely outside of our control (petrol costs and rising costs of delivery by courier partners)

If this applies to your order, we will always contact you before dispatch to discuss the available options. These may include:

Proceeding with a small additional freight contribution.
Collecting the order from one of our suppliers or a nearby courier depot where available.
Cancelling the order for a full refund if a suitable solution cannot be reached.

Please be assured that we only request an additional freight contribution in exceptional circumstances where the courier cost is substantially higher than normal. Our goal is always to deliver your order at the advertised price whenever possible.

If you’re unsure whether an item may be affected, you’re welcome to contact us before placing your order and we’ll gladly provide a delivery estimate.

Thank you for your understanding and ongoing support!