The HeadRush Pedalboard stormed the market with groundbreaking innovation in FX and Amp modeling. Now that you’ve elevated your rig to the new innovative standards of today’s modelers, don’t rely on the limited frequency response of a traditional amplifier or PA speakers. You need the FRFR-112.

The HeadRush FRFR-112 is a 2000-watt full-range, flat-response powered cabinet that perfectly complements your HeadRush Pedalboard (or any other multi-FX/amp modeler) to give you a realistic room-filling sound with the authentic feel of a speaker pushing air.

We built the HeadRush FRFR-112 just for you, the discerning guitarist/bassist. That’s why we focused on the key features you demand.

Features:

Specially-voiced 12-inch woofer and high-frequency compression driver deliver a precise, full response across the entire frequency range without any artificial coloration
2000 watts of peak power delivers clarity, punch and enough headroom for any venue
(2) XLR/TRS 1/4-inch combo inputs with independent volume controls and clip indicator
Contour EQ switch helps you cut through muddy-sounding stage mixes
Ground-Lift switch eliminates unwanted noise at venues with grounding issues
XLR output sends your mix to the front of house or links additional FRFR-112 cabinets
Lightweight and flexible tilt-back cabinet design that can also be pole-mounted

Includes:

FRFR-112
IEC Power Cable
User Guide
Safety and Warranty Manual

Specifications :

Output Power: 2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF)

LF Driver: 12-inch (305 mm) LF driver, 3-inch (76.2 mm) high-temperature voice coil

HF Driver: 1.4-inch (35 mm) voice coil, neodymium magnet HF driver, with precision wave guide

Crossover: 2KHz

Maximum SPL: 131 dB peak, 128 dB continuous (dB SPL @ 1 m)

Frequency Response: 53 Hz – 20 kHz (+/- 3 dB)

Frequency Range: 46 Hz – 22 kHz (-10 dB)

Horn Coverage: 90° H x 60° V nominal

Equalization: Contour Switch Low and High Frequency +3dB Boost

Connectors: (2) XLR/TRS 1/4-inch (6.35 mm) combo inputs, (1) XLR link output, (1) IEC power cable input

Controls: (2) Volume, Power on/off switch; EQ contour switch; Ground-Lift switch

Indicators: 2 x Power LED (front and rear), Clip limiter LED

Protection: Electronic clip, Thermal and transducer overdrive protection

AC Voltage Input: 100-110/110-120/220–240 V, 50/60 Hz

Enclosure: Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille

Dimensions (H x W x D): 23.8” x 13.9” x 13.8” / 605mm x 354mm x 350mm

Net Weight: 35.87 lbs. / 16.27 kg.

Price-Flex

Price Flex

Found a better price elsewhere?

Send us the details and we’ll see if we can match or beat the offer while still providing the service, support and warranty that Bounce Online customers expect.

✔ Trusted South African retailer since 2015
✔ Local warranty and support
✔ Fast nationwide delivery
✔ Competitive pricing on leading brands

Simply complete the form below and we’ll get back to you as soon as possible.

Delivery Exclusions

PLEASE NOTE:

Some products are exceptionally large, heavy or bulky and require specialist freight services. This typically includes items such as large PA speakers, dual 15″ speaker cabinets, dual 18″ subwoofers, flight cases and other oversized or very heavy equipment.

We work hard to keep our prices as competitive as possible and, in most cases, delivery is completely covered by our standard shipping rates. However, for certain oversized items being delivered to regional or outlying areas, the actual courier cost can be significantly higher than standard deliveries. This is also owing to factors completely outside of our control (petrol costs and rising costs of delivery by courier partners)

If this applies to your order, we will always contact you before dispatch to discuss the available options. These may include:

Proceeding with a small additional freight contribution.
Collecting the order from one of our suppliers or a nearby courier depot where available.
Cancelling the order for a full refund if a suitable solution cannot be reached.

Please be assured that we only request an additional freight contribution in exceptional circumstances where the courier cost is substantially higher than normal. Our goal is always to deliver your order at the advertised price whenever possible.

If you’re unsure whether an item may be affected, you’re welcome to contact us before placing your order and we’ll gladly provide a delivery estimate.

Thank you for your understanding and ongoing support!