The Artist Elite® AE3000 delivers supreme performance at extreme SPLs. This high-SPL large diaphragm cardioid condenser instrument mic excels in applications such as guitar cabinets, toms, snare, timpani, horns and overheads. Its large-diaphragm capsule combines with the open architecture of the headcase to provide an extremely accurate and open sound. Its low-profile side-address design with tapered grille allows for optimal positioning.

Key Features

Excels in high-SPL applications
Large-diaphragm capsule combines with the open architecture of the headcase to provide an extremely accurate and open sound
Low-profile side-address design with tapered grille allows optimal positioning of element vis-à-vis sound source
Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
Robust design for enduring dependability on the road
Integral 80 Hz HPF switch and 10 dB pad

General Specifications

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 20-20,000 Hz
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: -43 dB (7.0 mV) re 1V at 1 Pa
Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
Noise: 11 dB SPL
Dynamic Range: 137 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio: 83 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 11-52V DC, 3 mA typical
Switches: High-pass filter; 10 dB pad (nominal)
Output Connector: Integral 3-pin XLRM-type
Audio-Technica Case Style: R6
Weight: 170g (6.0 oz)
Dimensions (Long x Maximum Diameter): 115.5mm x 48mm / 4.55″ x 1.89″
Accessories Included
- AT8471 isolation clamp for 5/8″-27 threaded stands
- 5/8″-27 to 3/8″-16 threaded adapter
- Soft protective pouch