Power to the Performers

Having a dedicated monitor mix engineer can be expensive and running monitor mixing from FOH can be too demanding– neither of these is ideal. What if every musician could create their personal monitor mix with a small dedicated mixer on-stage? That’s what Personal Monitoring is all about!

Save time and energy by giving the control to the musicians! Personal monitors also allow for built-in effects, improving sound; built-in microphones, improving both communication and immersion; All controlled with a simplified user interface.

P24 Scales to You

No matter if you’re using a single P24 to provide an artist’s mix in your studio recording room, or you’re deploying a large setup for an orchestra pit with several daisy-chained P24HUBs– setup and configuration is always a breeze.

The P24HUB is the obvious choice for larger setups especially in touring applications. However, several P24 personal mixers can be daisy-chained without a hub. This is ideal when supporting smaller impromptu gigs.

Go Long

For the most robust performance and longest cable runs, using high-quality DMX cabling is recommended.

For short connections, standard XLR cables can be used. As there is no capacitance standard for microphone cables, range performance can vary substantially. Investing in high-quality DMX cables helps P24 perform best.

Widespread Compatibility and Connectivity

P24HUB can be fed audio from 4 source connections:

AES50 25-48: 12 stereo groups as well as channel strip labelling for all P24 mixers
AES50 33-48: 8 mono and 4 stereo groups as well as channel strip labelling for all P24 mixers
StageConnect: 12 stereo groups as well as channel strip labelling for all P24 mixers
Ultranet: 8 mono and 4 stereo groups

P24HUB is compatible across a wide variety of Behringer and Midas digital mixers. From using Ultranet with the Behringer XR18 digital mixer, to StageConnect with Behringer WING. P24HUB even includes a 96k-to-48k converter over AES50 for high-end console usage.

The Perfect Wireless IEM Pairing

P24HUB’s 8 pairs of balanced stereo outputs allow for up to 8 sets of wireless IEMs.

For a cleaner workstation, P24HUB can be the controller for all wireless IEMs. Both the hub and the IEM transmitters can be stored in a separate side rack

If talent on-stage are all using wired headphones or IEMs, the 16 balanced outputs can be used to drive supplemental loudspeakers and amplifiers.

Power Up Multiple P24s!

P24HUB allows for up to 4 P24’s connected directly. Each P24 mixer can also have a second P24 daisy-chained for a total of 8 personal mixers per P24HUB.

Using the P24HUB can also output each of the personal mixes on each of the 16 analog TRS out.

Daisy-chaining P24 mixers without a P24HUB is also possible, however every other mixer will need their own DC power supply.

Simply Go Anywhere

Integrating P24HUB into your rack unit is extremely easy and its compact 1U form-factor makes installation and integration a breeze. P24HUB’s chassis is engineered to be durable for life on the road.

The P24HUB can live in the same side rack as all wireless IEM transmitters, with everything pre-wired and organized. The included auto-switching power supply allows for worldwide tour usage.

Communication Made Simple

Communication between engineers and on-stage talent is vital for a smooth performance. With P24HUB’s StageTalk intercom system, individual channels for FOH, stage technicians and musicians can all communicate cohesively. Using the two 4.2 outputs for talkback signal, engineers can set up a wedge or headphone amp for monitoring as well.

StageConnect: Connect More with Less

Transfer 32 channels of 44.1kHz/48kHz and 24-bit audio to and from I/O interfaces, hubs, personal monitoring mixers, and more using just one XLR/DMX cable.

For the best possible quality and maximum length, using high quality DMX cabling allows for the best reliability and longest cable runs.
It is also possible to use standard XLR mic cabling for short connections of a few meters, such as connecting your side rack or internal rack connections
The StageConnect Configurator app helps to calculate channel count, power requirements, and cable lengths for StageConnect setups. Available for Mac, PC and Linux.

Connections

AES50 sync HOST/Master/thru	2 × RJ45
ULTRANET input/output	2 × RJ45
StageConnect HOST/Master	1 × male
StageConnect CLIENT/Slave	1 × female
StageConnect remote outputs	4 × male
Analog outputs	16 × 1/4″ TRS
USB	Type B

AES50

Audio channels	16/24
Sample rate	44.1 / 48 kHz
Bit depth	24 bit
Remote power	PoE (IEEE802.3at)
Latency	146 μs at 44.1 Hz / 125 μs at 48 kHz
Cable length	up to 80 m

StageConnect

Audio channels	24
Sample rate	44.1 / 48 kHz
Bit depth	24 bit
Phantom power	12 V DC / 18 W
Latency	146 μs at 44.1 Hz / 125 μs at 48 kHz
Cable	XLR balanced or DMX cable
Cable length	up to 40 m with 110 ohm DMX cable

Power

Power consumption	125 W
Mains connection	Standard IEC receptacle

Dimensions/weight

Dimensions (H × W × D)	44 × 483 × 151 mm (1.8 × 19.0 × 5.9″)
Weight	2.72 kg (6.00 lbs)

Price-Flex

Price Flex

Name: Behringer P24HUB Monitor Mixer
Brand: Behringer
SKU: BEHP24HUB
Availability: InStock

Found a better price elsewhere?

Send us the details and we’ll see if we can match or beat the offer while still providing the service, support and warranty that Bounce Online customers expect.

✔ Trusted South African retailer since 2015
✔ Local warranty and support
✔ Fast nationwide delivery
✔ Competitive pricing on leading brands

Simply complete the form below and we’ll get back to you as soon as possible.

Delivery Exclusions

PLEASE NOTE:

Some products are exceptionally large, heavy or bulky and require specialist freight services. This typically includes items such as large PA speakers, dual 15″ speaker cabinets, dual 18″ subwoofers, flight cases and other oversized or very heavy equipment.

We work hard to keep our prices as competitive as possible and, in most cases, delivery is completely covered by our standard shipping rates. However, for certain oversized items being delivered to regional or outlying areas, the actual courier cost can be significantly higher than standard deliveries. This is also owing to factors completely outside of our control (petrol costs and rising costs of delivery by courier partners)

If this applies to your order, we will always contact you before dispatch to discuss the available options. These may include:

Proceeding with a small additional freight contribution.
Collecting the order from one of our suppliers or a nearby courier depot where available.
Cancelling the order for a full refund if a suitable solution cannot be reached.

Please be assured that we only request an additional freight contribution in exceptional circumstances where the courier cost is substantially higher than normal. Our goal is always to deliver your order at the advertised price whenever possible.

If you’re unsure whether an item may be affected, you’re welcome to contact us before placing your order and we’ll gladly provide a delivery estimate.

Thank you for your understanding and ongoing support!