DSP24
PROFESSIONAL SPEAKER MANAGEMENT PROCESSOR – 2 IN/4 OUT

The ideal replacement for conventional analogue processors, such as crossovers, graphic equalisers and limiters, with password protection

Best value on the market
2 IN / 4 OUT SPEAKER MANAGEMENT PROCESSOR

3 × PARTIALLY EDITABLE ONBOARD PRESETS
Requires no technical knowledge or experience to set up

27 × PRE-LOADED NON-EDITABLE HYBRID PRESETS
Set up to work with the majority of Hybrid and Hybrid+ amplifier and speaker combinations.
Requires no technical knowledge or experience.

2 × FULLY EDITABLE PRESETS
Can be edited with software accessed from PC or smart device

Features
• Linked left and right inputs
• 4 x input PEQs, each with selectable filters (high-shelf, low-shelf, notch, high-pass and low-pass)
• Outputs 1 and 2 as well as outputs 3 and 4 linked by default
• HPF or LPF with 6, 12, 18 and 24 dB/oct slopes
• Crossover types include Linkwitz-Riley, Butterworth or Bessel filters
• Linked outputs 1 and 2 as well as Linked outputs 3 and 4 can switch between PEQ and 30-band graphic EQ
• 8 × PEQs for linked outputs 1 and 2 as well as outputs 3 and 4, each with selectable filters (high-shelf, low-shelf, notch, high-pass and low-pass)
• Time-alignment up to 15 ms on linked outputs 1 and 2 and linked outputs 3 and 4
• Linked outputs 1 and 2 as well as linked outputs 3 and 4 have a limiter with attack, release and threshold
• Independent phase invert for all outputs
• Independent mute function for all outputs
• Electronic Earth-lift
• Utilities menu allows you to load the preset from a smart device, save the preset to a smart device, write the preset to the DSP24, change and save the password, upgrade the firmware
and change the LED logo’s colour and intensity

Technical Specifications
Analogue inputs (A and B): Electronically balanced XLR
Analogue outputs (1, 2, 3 and 4): Electronically balanced XLR
Maximum RMS input level: +20 dBu
Input impedance: 20 kΩ @ 1 kHz
Dynamic range: 100 Db
Resolution: 24-bit Delta-Sigma
Maximum RMS output level: +20 dBu
Dynamic range: 104 dB typ.
Output impedance: 100 Ω @ 1 kHz
Frequency response: 10 Hz to 35 kHz (±3 dB)
Overall dynamic range: 102 dB
THD + noise ratio: 0,005% @ 0 dBu
Mains voltage: 100–240 VAC 50–60 Hz
Fuse rating: 250 mA
Power consumption: <10 W
Mains connector: Standard IEC receptacle
Net dimensions (H×D×W): 45 mm × 127 mm × 483 mm
Shipping dimensions (H×D×W): 70 mm × 85 mm × 560 mm
Net weight: 1.6 kg
Shipping weight: 2 kg

HYBRID is a South African brand with over 30 years’ experience in professional audio, stage and lighting. Our brand is aimed specifically at the African market to meet our continent’s demands for features, performance and budget.

HYBRID+ is our flagship brand, offering features and performance comparable to world-renowned brands and making HYBRID+ one of the best price-to-performance ratio brands.

HYBRID DSP24
MANUAL DOWNLOAD

FIRMWARE DOWNLOAD

Price-Flex

Price Flex

Found a better price elsewhere?

Send us the details and we’ll see if we can match or beat the offer while still providing the service, support and warranty that Bounce Online customers expect.

✔ Trusted South African retailer since 2015
✔ Local warranty and support
✔ Fast nationwide delivery
✔ Competitive pricing on leading brands

Simply complete the form below and we’ll get back to you as soon as possible.

Delivery Exclusions

PLEASE NOTE:

Some products are exceptionally large, heavy or bulky and require specialist freight services. This typically includes items such as large PA speakers, dual 15″ speaker cabinets, dual 18″ subwoofers, flight cases and other oversized or very heavy equipment.

We work hard to keep our prices as competitive as possible and, in most cases, delivery is completely covered by our standard shipping rates. However, for certain oversized items being delivered to regional or outlying areas, the actual courier cost can be significantly higher than standard deliveries. This is also owing to factors completely outside of our control (petrol costs and rising costs of delivery by courier partners)

If this applies to your order, we will always contact you before dispatch to discuss the available options. These may include:

Proceeding with a small additional freight contribution.
Collecting the order from one of our suppliers or a nearby courier depot where available.
Cancelling the order for a full refund if a suitable solution cannot be reached.

Please be assured that we only request an additional freight contribution in exceptional circumstances where the courier cost is substantially higher than normal. Our goal is always to deliver your order at the advertised price whenever possible.

If you’re unsure whether an item may be affected, you’re welcome to contact us before placing your order and we’ll gladly provide a delivery estimate.

Thank you for your understanding and ongoing support!