EVP-X215MK2

EVP-X215 MKII is a dual 15″ quasi three-way loudspeaker from our EVP-X MKII Series — built for high-output live sound reinforcement where deep bass, strong projection, and durability are essential.

Loaded with two 15″ LF drivers featuring 2.5″ voice coils and a 1.75″ HF compression driver, it delivers powerful low-end punch with enhanced vocal presence and clarity. With 700 W AES (1400 W programme / 2800 W peak) handling and up to 135 dB max SPL @ 1 m, EVP-X215 MKII is ideal for larger venues, mobile PA rigs, DJs, live bands, and club installations.

The 90° x 60° elliptical waveguide ensures consistent HF dispersion across wide horizontal areas while maintaining focused vertical coverage. A +3 dB HF boost switch allows for instant high-frequency enhancement when additional brightness is required.

Built for heavy-duty use, EVP-X215 MKII features a rugged carpet finish, steel grille, and rubberised 4-way carry handles for easy transport. Connectivity is flexible, thanks to 4 pole speaker connectors and 1/4″ jack connectors.

A punchy, high-powered cabinet with serious low-frequency authority, EVP-X215 MKII is designed to deliver reliable, full-spectrum performance night after night.

Specification	Value
Active or Passive	Passive
System Type	Full-Range
Configuration	Quasi 3-way
System Continuous Power	700 W
System Programme Power	1400 W
System Peak Power	2800 W
Max SPL @ 1m	135 dB
Freq Response (+/-3 dB)	40 Hz – 20 kHz
Freq Range (-10 dB)	35 Hz – 20 kHz
IP Certification	None
Driver Brand	Wharfedale Pro
LF Driver Size	2 x 15″
LF Voice Coil Size	2.5″
LF Rated Impedance	8 Ω
LF Power (RE:AES2-2012)	2 x 350 W
HF Driver Type	Compression Driver
HF Voice Coil Size	1.75″
HF Diaphragm Material	Titanium
HF Exit Size	1″
HF Power (RE:AES2-2012)	40 W
HF Rated Impedance	8 Ω
Preset Library	Yes
Input Connector	2 x 4 Pole Speaker Connector / 2 x 6.3mm jacks
Waveguide Type	Elliptical
Enclosure Material	Particle Board
Grille Material and Finish	Steel Black
Finish	Black Carpet
Handles	2
Deployment	Ground
Pole Mount	None
Brackets Included	No
Rigging	No
Nominal Coverage (H x V)	90° x 60°
Sensitivity 2.83 V / 1 m	100 dB
System Rated Impedance	4 Ω
Crossover Frequency	2.3 kHz
Recommended HPF = BW 18 dB/OCT.	35 Hz
Transformer (T)	No
Included Accessory	User Manual
Unpacked – Height (mm)	1058
Unpacked – Width Front (mm)	502
Unpacked – Width Rear (mm)	330
Unpacked – Depth (mm)	467
Packed – Height (mm)	1140
Packed – Width Front (mm)	520
Packed – Width Rear (mm)	483
Packed – Depth (mm)	40.26
Weight – Nett (kg)	44.54
Weight – Gross (kg)	46.06

CPD 2600

CPD2600 is a 2-channel amplifier from our CPD Series, designed for professional touring, rental and installation environments that demand powerful, efficient performance and long-term reliability.

Delivering 650 W per channel at 8 Ω, 1000 W at 4 Ω and up to 1940 W bridged at 8 Ω, it uses Class H topology for improved efficiency, reduced heat generation and clean, controlled output. A heavy-duty toroidal transformer ensures stable power delivery even under fluctuating AC conditions, while comprehensive protection circuitry safeguards against thermal, overcurrent, DC and short-circuit faults.

Built for real-world durability, the CPD2600 features a removable front grille for quick cleaning of air filters — maintaining optimum cooling performance. With Stereo, Parallel and Bridge modes, switchable limiter and variable-speed fans, it’s a tough, high-output amplifier ready for demanding professional use.

Specification	Value
Amp Channels	2
Topology	Class H
8Ω	2 x 650 W
4Ω	2 x 1000 W
8Ω Bridged	1 x 1940 W
Input Connectors	2 x XLR Socket
Output Connectors	2 x 4 Pole Speaker Connector
Link Connectors	2 x XLR Pin
Mode Switch	Parallel / Stereo / Bridge Mode / Limiter switch
DSP Features	None
Slew Rate	>40 V / us
Output RMS Voltage (V)	69.3 V
Maximum input Level	22 dBu (9.7 Vrms)
Crosstalk	<-70 dB
Amplifier Frequency Response	20 Hz – 30 kHz
Amplifier Input Impedance	20 KΩ
Damping Factor	> 300
SNR	≥100
Protection	Thermal protect, Over-current protect, Output DC protect, Output short protect, Power on/off mute
Main Power	110-120 V AC or 100 V AC or 220-230 V AC or 240 V AC ~ 50/60 Hz
Included Accessory	User Manual
Unpacked – Height (mm)	88
Unpacked – Width Front (mm)	483
Unpacked – Width Rear (mm)	483
Unpacked – Depth (mm)	450
Packed – Height (mm)	195
Packed – Width Front (mm)	533
Packed – Width Rear (mm)	533
Packed – Depth (mm)	573
Weight – Nett (kg)	18.5
Weight – Gross (kg)	20.55

Price-Flex

Price Flex

Found a better price elsewhere?

Send us the details and we’ll see if we can match or beat the offer while still providing the service, support and warranty that Bounce Online customers expect.

✔ Trusted South African retailer since 2015
✔ Local warranty and support
✔ Fast nationwide delivery
✔ Competitive pricing on leading brands

Simply complete the form below and we’ll get back to you as soon as possible.

Delivery Exclusions

PLEASE NOTE:

Some products are exceptionally large, heavy or bulky and require specialist freight services. This typically includes items such as large PA speakers, dual 15″ speaker cabinets, dual 18″ subwoofers, flight cases and other oversized or very heavy equipment.

We work hard to keep our prices as competitive as possible and, in most cases, delivery is completely covered by our standard shipping rates. However, for certain oversized items being delivered to regional or outlying areas, the actual courier cost can be significantly higher than standard deliveries. This is also owing to factors completely outside of our control (petrol costs and rising costs of delivery by courier partners)

If this applies to your order, we will always contact you before dispatch to discuss the available options. These may include:

Proceeding with a small additional freight contribution.
Collecting the order from one of our suppliers or a nearby courier depot where available.
Cancelling the order for a full refund if a suitable solution cannot be reached.

Please be assured that we only request an additional freight contribution in exceptional circumstances where the courier cost is substantially higher than normal. Our goal is always to deliver your order at the advertised price whenever possible.

If you’re unsure whether an item may be affected, you’re welcome to contact us before placing your order and we’ll gladly provide a delivery estimate.

Thank you for your understanding and ongoing support!