No products in the cart.
RCF DMA 162
Check stock before ordering
R18,665.00
RCF DMA 162 Two-Channel Matrix Amplifier
Availability: In stock
Or split into 4x interest-free payments Learn more
No interest, no fees,
4x instalments over 6 weeks
How it works
Payflex lets you get what you need now, but pay for it over four interest-free instalments. You pay 25% upfront, then three payments of 25% over the following six weeks.
1
Shop Online
and fill your cart
2
Choose Payflex at checkout
3
Get approved and
pay 25% today
with your debit
or credit card
4
Pay the remainder
over 6-weeks.
No interest.
No fees.
Product Description
DMA 162 is a two-channel class-D matrix amplifier equipped with a powerful DSP platform, allowing managing inputs and outputs in terms of routing and equalization (a complete set of processing functions is available, including PEQ, FIR filters, bass enhancement, limiters, compressors and environmental equalization); moreover, dedicated presets for RCF speakers have been implemented to optimize their acoustic performance. It can distribute 4 audio channels to DMA 162P units through an analogue audio BUS, combining a flexible and scalable multi-room architecture with an easy connection and installation. Its configuration is simple and user-friendly and can be carried out through either its front panel controls (with OLED display) or RDNet. Thanks to its installation flexibility, accurate design, and robustness, it is ideal for a wide range of business music and installed sound applications.
Key Features
- 2 x 160 W Class-D power amplifier
- 20 ÷ 20000 Hz frequency range
- Full on-board processing
- RCF speakers’ presets
- Proprietary bass enhancer algorithm
- FiRPHASE linear phase filters
- Flexible and scalable multi-room architecture
- Suitable for desktop or rack installation
- RDNet ready for networked management
- Remote controls and paging console accessories
Scalable Architecture
To fit with any installation need, DMA amplifiers have been designed with a highly scalable architecture and each device can distribute 4 audio channels to satellite units. This allows for increasing installed power and creating a multi-room architecture. The connection can be done with just 1 CAT5e cable. Each satellite unit can be differently set using the DIP-SWITCH on the rear panel to receive the desired channels.
Full On-Board Processing
Equipped with a powerful DSP platform, DMA units integrate RCF proprietary technologies such as FiRPHASE, a FiR filtering technology, and BASS ENHANCER, a sophisticated algorithm that increases low-frequency perception without affecting the output power.
Speakers Presets
Pre-loaded presets, to optimize the performance and equalization of any RCF speaker and to have the right RCF signature sound.
Easy and Flexible Configuration
RCF Business Music products are ready to use in a few steps, even faster when connected to the RDNet networked management.
RCF RDNet
Network Control and Much More
RDNet is a robust management network and control platform for small, medium and large arena-sized sound systems, as well as complex and extended installations. Based on a proprietary network protocol, RDNet provides intuitive control and monitoring of every connected device/object in the RCF audio system. Each device has DSP to address specific presets or modifications of parameters to single or groups of objects. A network user can change level, delay, EQ (linear phase FiR as well) and other settings, including advanced subwoofer configurations. RDNet is not only designed for loudspeakers—you can control parameters and routing of multiple RCF devices, such as digital matrixes or amplifiers.
General Specifications
- Amplifier Class: D
- Output Power
- 2 X 160 W @ 4 ohm
- 2 X 160 W @ 8 ohm
- 1 X 320 W @ 4 ohm (bridge)
- 1 X 320 W @ 8 ohm (bridge)
- Output Power @ 70V: 1 X 320 W @ 70 V
- Frequency Response (-3dB): 20 Hz ÷ 20000 Hz
- Distortion (THD+N) @ 1 kHz Nominal Power: <0.01 %
- Total Number of Inputs: 5
- Balanced: 2
- Unbalanced: 3
- Mono: 2
- Stereo: 3
- VOX: Yes
- Line Inputs: 3
- Line Connectors: JACK, Picoflex, RCA
- Mic+Line Inputs: 1
- Mic+Line Connectors: Euroblack
- VOX: Yes
- Paging Inputs: 1
- Paging Connectors: RJ45
- Paging Command: Contact
- General Purpose Inputs (GPI): 1
- Signal Output Number: 1
- Signal Output Connectors: RCA
- Power Output Connectors: Euroblock
- DSP: Yes
- EQ Filters: Yes
- FIR: Yes
- Compressors: Yes
- Tone Controls: Yes
- High-Pass Filter: 80 Hz ÷ 200 Hz
- Configuration: Front panel, PC Software
- RCF Speakers Presets: Yes
- Protocols for System Integration: Proprietary
- RDNet: Yes
- Cooling: Forced
- Short Circuit: Yes
- Thermal: Yes
- DC: Yes
- Fuses: Yes
- VHF (Very High Frequencies): Yes
- Operating Voltage: 90-240 V~ 50/60Hz
- Power Consumption (MAX): 400 W
- Safety Agency: CE compliant, UL 62368-1
- Color: Black
- Rack Mounting: 1/2 19″, 1U , Optional rack mounting accessory required
- Dimensions (WxDxH): 213mm X 314mm X 44mm / 8.39″ X 12.36″ X 1.73″
- Weight: 1.7kgs / 3.57lbs
Reviews
There are no reviews yet.